Basic Info.
Application
Double Beam Crane, Gantry Crane, Bridge Crane, Tower Crane, Single Grinder Crane, Lifting Platform, Material Lifting
Lift Speed
as Your Request
Maximum Lifting Height
as Your Request
Certification
CE, ISO9001:2000, TUV
Certificate
ISO9001, SGS, CE
Transport Package
Wooden Case, Nude
Specification
CE, SGS, ISO
Product Description
Electric hoist
Specifications
1. CE factory, High Quality
2. Safety, Low Noise
3. Low repair rate
4. Competitive Price
5. Perfect Service
6. Form A & Form E
7. Export to many countries
Hoist gearcase & Motor
Triple reduction hoist gearing is oil bathlubricated, operating in an oil-tight, cast aluminum gear case. The gear case is conveniently located to allow ease of access in the air, while providing a low headroom design with maximum lift. The motor is two-speed with a 6:1 ratio from high to low speed; give a low speed for precise load handling and a high speed for fast throughput.
Wire rope drum and rope guide
The wire rope drum is machined from quality steel, deep-grooved with a rope guide to help ensure the rope stays in the grooves.
Drum, reeving and lower block
Hoist is reeved to a low-headroom design lower block for minimum headroom and maximum lift. Wire rope is secured to the drum with three heavy ductile iron clamps and designed to have three extra wraps of wire rope on the drum with the rope at full extension (low hook).
Trunnion style block and hook
Each hoist comes with a bearing nounted trunnion hook that rotates 360 and swings back and forth 180 for easier load adjustment.
Upper/lower geared limit switch
The hoist is provided with an upper/lower, geared control circuit hoist motion limit switch as standard. An additional bloack-operated upper control circuit limit switch is available as an option.
Hoist overcapacity limit switch
A hoist overcapacity limit switch is provided as standard to prevent lifting excessive overloads.
Trolley traverse drive
Two wheels are driven: one on each side of the frame for maximum traction and uniform tracking. Traverse motor drives a right angle worm gear reducer for somooth starting andstopping.
Control panel
Hoist and trolley controls are hoiused in a common IP54 enclosed with the following features as standard:
Phase-loss detection/protection
Motor line fusing
Fused control circuit transformer
Hoist motion monitor
Motor thermal overloads
Hoist over capacity limit switch
All components are of the highest quality and the panel design meets EN and IEC.
Type | Capacity(t) | Lifting Height(m) | Work Class(FEM/ISO) | Lifting Speed(m/min) | Motor Power(KW) | Traveling Speed(m/min) |
KF02-4106ES | 2 | 6 | 3M/M6 | 5/0.8 | 3.2/0.45 | 5-20 |
KF02-4109ES | 2 | 9 | 3M/M6 | 5/0.8 | 3.2/0.45 | 5-20 |
KF02-4112ES | 2 | 12 | 3M/M6 | 5/0.8 | 3.2/0.45 | 5-20 |
KF02-4115ES | 2 | 15 | 3M/M6 | 5/0.8 | 3.2/0.45 | 5-20 |
KF02-4118ES | 2 | 18 | 3M/M6 | 5/0.8 | 3.2/0.45 | 5-20 |
KF03-4106ES | 3 | 6 | 2M/M5 | 5/0.8 | 3.2/0.45 | 5-20 |
KF03-4109ES | 3 | 9 | 2M/M5 | 5/0.8 | 3.2/0.45 | 5-20 |
KF03-4112ES | 3 | 12 | 2M/M5 | 5/0.8 | 3.2/0.45 | 5-20 |
KF03-4115ES | 3 | 15 | 2M/M5 | 5/0.8 | 3.2/0.45 | 5-20 |
KF03-4118ES | 3 | 18 | 2M/M5 | 5/0.8 | 3.2/0.45 | 5-20 |
KF05-4106ES | 5 | 6 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4109ES | 5 | 9 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4112ES | 5 | 12 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4115ES | 5 | 15 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4118ES | 5 | 18 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF10-4106ES | 10 | 6 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4109ES | 10 | 9 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4112ES | 10 | 12 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4115ES | 10 | 15 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4118ES | 10 | 18 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF12-4106ES | 12 | 6 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4109ES | 12 | 9 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4112ES | 12 | 12 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4115ES | 12 | 15 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4118ES | 12 | 18 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
Type | Capacity(t) | Lifting Height(m) | Work Class(FEM/ISO) | Lifting Speed(m/min) | Motor Power(KW) | Traveling Speed(m/min) |
KF05-4106ED | 5 | 6 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4109ED | 5 | 9 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4112ED | 5 | 12 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4115ED | 5 | 15 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF05-4118ED | 5 | 18 | 2M/M5 | 5/0.8 | 6.1/1 | 5-20 |
KF10-4106ED | 10 | 6 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4109ED | 10 | 9 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4112ED | 10 | 12 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4115ED | 10 | 15 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF10-4118ED | 10 | 18 | 2M/M5 | 5/0.8 | 9.5/1.5 | 5-20 |
KF12-4106ED | 12 | 6 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4109ED | 12 | 9 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4112ED | 12 | 12 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4115ED | 12 | 15 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF12-4118ED | 12 | 18 | 1AM/M4 | 5/0.8 | 12.5/2 | 5-20 |
KF16-4106ED | 16 | 6 | 2M/M5 | 5/0.8 | 16/2.6 | 5-20 |
KF16-4109ED | 16 | 9 | 2M/M5 | 5/0.8 | 16/2.6 | 5-20 |
KF16-4112ED | 16 | 12 | 2M/M5 | 5/0.8 | 16/2.6 | 5-20 |
KF16-4115ED | 16 | 15 | 2M/M5 | 5/0.8 | 16/2.6 | 5-20 |
KF16-4118ED | 16 | 18 | 2M/M5 | 5/0.8 | 16/2.6 | 5-20 |
KF20-4106ED | 20 | 6 | 1AM/M4 | 5/0.8 | 16/2.6 | 5-20 |
KF20-4109ED | 20 | 9 | 1AM/M4 | 5/0.8 | 16/2.6 | 5-20 |
KF20-4112ED | 20 | 12 | 1AM/M4 | 5/0.8 | 16/2.6 | 5-20 |
KF20-4115ED | 20 | 15 | 1AM/M4 | 5/0.8 | 16/2.6 | 5-20 |
KF20-4118ED | 20 | 18 | 1AM/M4 | 5/0.8 | 16/2.6 | 5-20 |
KF25-6106ED | 25 | 6 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF25-6109ED | 25 | 9 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF25-6112ED | 25 | 12 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF25-6115ED | 25 | 15 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF25-6118ED | 25 | 18 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF32-6106ED | 32 | 6 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF32-6109ED | 32 | 9 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF32-6112ED | 32 | 12 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF32-6115ED | 32 | 15 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF32-6118ED | 32 | 18 | 2M/M5 | 5/0.8 | 20/5 | 5-20 |
KF40-4106ED | 40 | 6 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF40-4109ED | 40 | 9 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF40-4112ED | 40 | 12 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF40-4115ED | 40 | 15 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF40-4118ED | 40 | 18 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF50-6106ED | 50 | 6 | 2M/M5 | 5/0.8 | 38 | 5-20 |
KF50-6109ED | 50 | 9 | 2M/M5 | 5/0.8 | 38 | 5-20 |
KF50-6112ED | 50 | 12 | 2M/M5 | 5/0.8 | 38 | 5-20 |
KF50-6115ED | 50 | 15 | 2M/M5 | 5/0.8 | 38 | 5-20 |
KF50-6118ED | 50 | 18 | 2M/M5 | 5/0.8 | 38 | 5-20 |
KF63-6106ED | 63 | 6 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF63-6109ED | 63 | 9 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF63-6112ED | 63 | 12 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF63-6115ED | 63 | 15 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF63-6118ED | 63 | 18 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF80-8106ED | 80 | 6 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF80-8109ED | 80 | 9 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF80-8112ED | 80 | 12 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF80-8115ED | 80 | 15 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
KF80-8118ED | 80 | 18 | 1AM/M4 | 5/0.8 | 38 | 5-20 |
Address:
No. 900, Jinmao Road, Zhoushi Town, Kunshan City, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000, IATF16949
Company Introduction:
KUNFENG CRANES Heavy Industry (Suzhou) Co., Ltd. (KUNFENG CRANES)--a manufacturer in the field of construction machinery lifting in China. Founded in 2003, it focuses on high-tech industries such as euVa conductors, new energy, precision laboratories, and design institutes. The main products: Clean room cranes, dust-free cranes, intelligent cranes, intelligent drive wheel boxes, and non-standard material lifting The complete solution of system engineering is a professional company that has been focusing on the research and development, manufacture and service of lifting equipment for a long time.
The company is headquartered in Suzhou, a famous historical and cultural city with beautiful scenery, and its production base is located in Dongtai Electronic Information Industrial Park, Yancheng. KUNFENG CRANES Heavy Industry, which is rooted in Suzhou, adheres to the urban character of "hard work will win", focusing on lifting as the core, focusing on "high-tech, high-quality", and constantly pursuing to make "lifting" professional, refined and efficient. Good and long-term, to be the service provider and manufacturer of the overall solution for the material lifting system.
For a long time, KUNFENG people have been adhering to the corporate tenet of "Integrity, quality-oriented", the working attitude of "people-oriented, morality first, and excellence", and the service concept of "honesty, seriousness, professionalism, and trust", "high High-level technology and high-quality product quality have won the recognition and support of a large number of partners from Jiangsu, Shanghai, Zhejiang and other parts of the country. Looking forward to the future, KUNFENG people keep pace with the times, develop and innovate, and are willing to cooperate with you to create brilliance.